Push-In Adaptor MPA


Push-In Adaptor MPA

  • For different materials
  • Internal seal
  • Resistant to 0.5 bar

Push-In Adaptor – for the internal connection of pipe systems with different dimensions and materials

The Single Pipe Connector joints pipe systems with different dimensions
and materials and can be used for flush-mounting and non-
buried pipe connections.

The Push-In Adaptor is made from a durable EPDM rubber and has a noise reducing impact on downpipes.

PHONE Sales & Technical-Team
+44 114 257 0040
Description
Push-In Adaptor MPA
Technical Specification

Push-In Adaptor for the internal connection of pipe systems with different dimensions and materials.

Manufacturer:

MISSION RUBBER (UK) Ltd., Sheffield, S35 9TG, T +44 (0) 114 257 - 0040

Pressure Tightness:

0.5 bar water / -0.3 bar vacuum

Sealing Material:

EPDM rubber according to BS EN 681-1

Stainless Steel:

V2A/1.4301 nach BS EN 10088-2

Temperature Resistance:

-40°C to +120°C, temporary max. temperature +160°C

Standard/Approval:

BS EN 681-1, CE16
PUSH-IN ADAPTOR MPA
Article NumberReferenceA
Size Range
(mm)
B
Size Range
(mm)
L
Length
(mm)
resistant to
(bar)
Weight
(kg)
78000075Push-In Adaptor MPA 7569-7573-851000.50.2
78000100Push-In Adaptor MPA 100100-105100-1161160.50.3
78000125Push-In Adaptor MPA 125117-125120-1411250.50.5
78000150Push-In Adaptor MPA 150145-157150-1681450.50.8
  • Position pipe ends.
    Position pipe ends.
  • Insert Single Pipe Connector into larger pipe. Apply lubricant to plain ended pipe.
    Insert Single Pipe Connector into larger pipe. Apply lubricant to plain ended pipe.
  • Insert smaller pipe into Single Pipe Connector.
    Insert smaller pipe into Single Pipe Connector.

steckadapter 01 3d

TitleFormatSize 
Datasheet (PDF)pdf876.85 KBDownload
Product Range (XLS)xls28.00 KBDownload