Bush with Standard Coupling


Bush with Standard Coupling

  • For compensating different outside diameters
  • In combination with Standard Coupling
  • Extra tightness through pretension
  • Resistant to 2.5 bar

Bush – in combination with Standard Coupling – for compensating larger outside diameter differences

Bushes are required to be used in combination with Standard Couplings
when there is an outside diameter difference of more than 12 mm.

By combining multiple bushes made from different thicknesses
(5, 9, 14, 24 mm) almost any connection can be achieved ensuring a tight fit.

Bushes are manufactured with pretension and tighten against each other. This effect is supported through the toothing of the rubber profile.

PHONE Sales & Technical-Team
+44 114 257 0040
Description
Bush with Standard Coupling
Technical Specification

Bushes with pretension for compensating larger outside diameter differences. Outside diameter differences need to be taken on site.

 

Manufacturer:

MISSION RUBBER (UK) Ltd., Sheffield, S35 9TG, T +44 (0) 114 257 - 0040

Pressure Tightness:

2.5 bar wasser / -0.3 bar vacuum

Jetting Resistance:

120 bar

Sealing Material:

EPDM or Nitrile (NBR) rubber according to BS EN 681-1

Temperature Resistance:

-40°C to +120°C, temporary max. temperature +160°C

Standard/Approval:

BS EN 16397-2, CE15
  • Slide coupling completely over larger plain end.
    Slide coupling completely over larger plain end.
  • Slide bush over smaller plain end and
position bush properly.
    Slide bush over smaller plain end and position bush properly.
  • Center coupling over joint. Tighten clamps and shear band reciprocally.
    Center coupling over joint. Tighten clamps and shear band reciprocally.
TitleFormatSize 
Datasheet (PDF)pdf215.16 KBDownload